MEDIATEKDownload MTK Secure Boot DA(Download Agent) Loader Files For MTK Devices
If you are reading this post, you might have faced FRP related issues on a Mediatek device even with professional tools like CM2, NCK, Miracle Box etc.
Most new Mediatek powered smartphones come with a secured boot/boot ROM that can’t be controlled with the normal MTK DA(Download Agent) which is always in the official SP flash tool and other Chinese smartphones fixing tools.
With the normal MTK_AllInOne_DA.bin file, you can perform operations on like FRP reset, firmware backup, flashing, read security codes etc on MTK devices.
But this isn’t possible on devices with a secured boot device.
Trying this will give you errors all through unless you find a way of getting through it directly on the phone.
Most CM2 users would have seen this error :
Operation : Format FileSystem [ v1.58 ]
1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey
Wait for phone…
Phone found! [ 9 ]
Sync…
Inital Boot Ok!
BB_CPU_PID : 6582
BB_CPU_NME : [MediaTek] MT6582_S00
BB_CPU_EXT : 0xCA01 , 0x8A00 , 0x0000
Processing BROM stage
Settings for BROM configured!
SecCfgVal : 0x00000000
BromVer : 0x00FF
BLVersion : 0x0001
PreLoader : Active [ Boot with PL ]
BootLdrSS : NORMAL with PRELOADER
Processing DA stage
DA Select done, will use MTK_AllInOne_DA_v5.1624.16.07
Sending and initialize DA …
[DA_ERROR] : SECURITYBOOT_BOOT_NOT_ACCEPTED
Boot Error!
Operation Failed
Elapsed: 00:00:05
Reconnect Power/Cable
This shows that the device can’t be communicated with the normal DA file since it has a secured boot. The simple solution is to use a custom secured DA file for the device and it can then accept any command from the tool/DA.
Some other devices might also need an AUTH(Authentication file) to get things done.
In this post, you will find secured boot DA files for popular MTK devices like
Tecno
Infinix
Itel
Huawei
Doogee
Wiko
Oppo
Qmobile
Asus
Acer
Etc
Using this file with Smartphone servicing tools like CM2 and NCK box will enable you to remove FRP on the affected device easily and safely.
If you have Infinity CM2 or NCK box, you can use the secure DA files and get FRP or any other operation done easily.
If you are reading this post, you might have faced FRP related issues on a Mediatek device even with professional tools like CM2, NCK, Miracle Box etc.
Most new Mediatek powered smartphones come with a secured boot/boot ROM that can’t be controlled with the normal MTK DA(Download Agent) which is always in the official SP flash tool and other Chinese smartphones fixing tools.
With the normal MTK_AllInOne_DA.bin file, you can perform operations on like FRP reset, firmware backup, flashing, read security codes etc on MTK devices.
But this isn’t possible on devices with a secured boot device.
Trying this will give you errors all through unless you find a way of getting through it directly on the phone.
Most CM2 users would have seen this error :
Operation : Format FileSystem [ v1.58 ]
1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey
Wait for phone…
Phone found! [ 9 ]
Sync…
Inital Boot Ok!
BB_CPU_PID : 6582
BB_CPU_NME : [MediaTek] MT6582_S00
BB_CPU_EXT : 0xCA01 , 0x8A00 , 0x0000
Processing BROM stage
Settings for BROM configured!
SecCfgVal : 0x00000000
BromVer : 0x00FF
BLVersion : 0x0001
PreLoader : Active [ Boot with PL ]
BootLdrSS : NORMAL with PRELOADER
Processing DA stage
DA Select done, will use MTK_AllInOne_DA_v5.1624.16.07
Sending and initialize DA …
[DA_ERROR] : SECURITYBOOT_BOOT_NOT_ACCEPTED
Boot Error!
Operation Failed
Elapsed: 00:00:05
Reconnect Power/Cable
This shows that the device can’t be communicated with the normal DA file since it has a secured boot. The simple solution is to use a custom secured DA file for the device and it can then accept any command from the tool/DA.
Some other devices might also need an AUTH(Authentication file) to get things done.
In this post, you will find secured boot DA files for popular MTK devices like
Tecno
Infinix
Itel
Huawei
Doogee
Wiko
Oppo
Qmobile
Asus
Acer
Etc
Using this file with Smartphone servicing tools like CM2 and NCK box will enable you to remove FRP on the affected device easily and safely.
If you have Infinity CM2 or NCK box, you can use the secure DA files and get FRP or any other operation done easily.
Hard Reset INFINIX Note 3 X601
1.At first use the Power button to switch off the device.
2.After that keep holding on Volume Down and Power keys together for a short while.
3.If INFINIX logo appears let go the Power button.
4.Release Volume Down when Factory Mode appears.
5 .In this menu choose "Clear eMMC" by using Volume keys to scroll down and the Power button to accept it.
6.Perfect!
1.At first use the Power button to switch off the device.
2.After that keep holding on Volume Down and Power keys together for a short while.
3.If INFINIX logo appears let go the Power button.
4.Release Volume Down when Factory Mode appears.
5 .In this menu choose "Clear eMMC" by using Volume keys to scroll down and the Power button to accept it.
6.Perfect!
Subscribe to:
Posts (Atom)
-
Hard Reset INFINIX Note 3 X601 1.At first use the Power button to switch off the device. 2.After that keep holding on Volume Down and Po...
-
MEDIATEKDownload MTK Secure Boot DA(Download Agent) Loader Files For MTK Devices If you are reading this post, you might have faced FRP re...
